Home > 2015-17 Mustang S550 >

S550 MUSTANG BOLT-IN ROLL CAGE 4-POINT (WR-15-BOLTINCAGE) 2015-2017

Mustang S550 4-Point Roll Bar - Bolt in Roll Cage 2015-2017
 
Alternative Views:


Our Price: $995.00


Availability: Usually ships within 24 hours
Product Code: WR-15-BOLTINCAGE


Roll Cage Color:
  

Qty:  
Description Technical Specs
 
S550 MUSTANG 4-Point Roll Bars:

Quite simply the finest 4-point S550 Mustang roll bars on the market! Borrowing from our exceedingly popular S197 4-point roll bar, we brought the same design principals into the new S550 Mustang roll bar.

[ INSTALLATION INSTRUCTIONS ]

What makes this S550 Mustang roll bar different?

• BOLTS-IN to the FACTORY corner gussets using EXISTING HOLES! Other 4-point bars either bolt to the weak sheet metal floor behind the front seats (dangerous!) or ask you to drill into the factory high-strength steel… which is nearly impossible. High strength steel is MUCH harder than normal steel and will take you HOURS! The Watson Racing roll bars bolt in using EXISTING BOLT HOLES surrounding the factory high-strength steel corner gussets for maximum safety and ease of installation.

• Extra strength- not only do we bolt to the front corner gussets, but the rear diagonal bars bolt through the floor directly above a factory cross member- one of the strongest areas at the back of the car!

• Minimal trim panel modification. With our roll bar’s design, the changes required to the trim panels are VERY minimal. No cutting your time panels in half with our bar!

• Minimal-bend design. Bends in tubes reduce a bar’s effectiveness and safety. We kept the number of bends to a minimum to maximize safety. Where bends are required, we use a CNC precision mandrel bending process to maintain strength.

• We sweat the details: 100-percent TIG-welded 1.75-inch x.120-inch -wall DOM tubing. 100-percent powder coated. Shoulder harness retention loops, standard. Welded/fixed harness bar and diagonal bar, standard. Precision-machined tube joints for high strength on rear support tubes- no through-bolting here, and notice the plug-welds! Zinc-plated heavy M10 metric fasteners included.

• No swing-outs. Swing out door bars are just not safe! We use the same precision machined joints in our door bars that we use at the rear of the bar.

• Full seat travel. Since the Watson Roll Bar mounts on top of the factory corner gussets (next to rear seat bottom cushion), the front seats are free to slide all the way back and maintain a comfortable driving position.

** Unfortunately, this part does not qualify for free shipping. Flat rate shipping cost is $145.00 (4-point) in the continental U.S.
Shipping weight is approximately 75 lbs.


Related Parts
S550 MUSTANG ROAD RACE ROLL CAGE (WR-15-ROADRACECAGE) 2015-2017 MUSTANG S550 DRAG RACE CAGE (WR-15-DRAGRACECAGE) 2015-2017 S550 MUSTANG CARPET KIT (WR-15-4PTCARPET) 2015-2017 MUSTANG S550 CHROMOLY 6-POINT ROLL BAR (WR-15-BOLTINCAGE6PT) 2015-2017
Our Price: $2,400.00

Add
Our Price: $1,800.00

Add
Our Price: $425.00

Add
Our Price: $1,495.00

Add
S550 MUSTANG ROAD RACE ROLL CAGE (WR-15-ROADRACECAGE) 2015-2017 S550 Mustang Drag Race Roll Cage  2015-2017 S550 Mustang Racing Parts 4 Point Roll Bar Seat Delete Carpet Kit 2015-2017 Mustang S550 6-Point Roll Bar Chromoly 2015-2017

Average Rating: 5 of 5 Total Reviews: 11 Write a review »

  0 of 0 people found the following review helpful:
 
Exceeded my expectations! August 7, 2017
Reviewer: Scott Pierce from Cincinnati, Ohio  
From the detailed directions, to the overall product quality my expectations were exceeded. Frank Naglich and the staff at WR are second to none for customer service. As stated the product quality on this product is amazing, take your time and the install is will go as instructed.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Great product May 13, 2017
Reviewer: Anonymous Person from Baton Rouge, LA United States  
The only issue I had with the installation was just that the back legs that stretch to behind the seats have a very very tight fitment under the car. The brackets are so close to the brake line that it's extremely nerve wrecking drilling down back there. I'd personally just get this welded next time.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
4-pt Roll Cage excellence April 19, 2017
Reviewer: Matthew Givens from Houston, TX United States  
Fit and finish on my Watson 4-pt cage is amazing. Instructions were easy to follow and I was able to install in about 7 hours. Would be faster with two people for the whole operation, but I did 90% by myself. Couldn't be happier with the product. Hope I never have a need for it though...

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Amazing March 15, 2017
Reviewer: Fred Marshall from Tulsa, OK United States  
Being a mechanical engineer for the past 30 years and having worked on cars since childhood, this is by far the best engineered aftermarket product I have ever worked with.  Especially the technically correct instructions (with pictures) gave me a confidence that lead me to trust the instructions more than my experience.  A beautiful product, well engineered and well documented.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
4-Pt Cage February 26, 2017
Reviewer: Bill McClendon from St Petersburg, FL United States  
After a brief conversation over the phone with the extremely helpful sales staff, I took the plunge and ordered the 4 pt cage for my GT350R. It shipped that day!  A couple of days later it was in the car. Excellent quality and functionality. I'm impressed by Watson Racing start to finish. Thank you!

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

2015-17 Mustang S550