Home > ford >

5.0L COYOTE ALUMINATOR N/A CRATE ENGINE (M-6007-A50NAA) 2015

5.0L COYOTE ALUMINATOR NA CRATE ENGINE-2015 - M-6007-A50NAA
 
Our Price: $10,395.00


Availability: Currently Unavailable
Product Code: WR-6007-A50NAA
Qty:

Description
 
CANCELLED!!!!


Ford Performance has taken the Mustang GT 5.0L Coyote engine and created another in its series of Aluminator crate engines built to deliver higher performance. The 5.0 Aluminator NA is built with connecting rods and pistons designed specifically for high performance applications. Mahle® 11.0:1 compression ratio forged pistons are hard anodized and feature Grafal® low friction coating. The connecting rods are premium Manley® H-beam with ARP® 2000 bolts and fitted with BOSS 302 high performance bearings. The 5.0L Aluminator NA is a direct bolt in for 2015-2016 Mustang GT. It can be used in street rod or resto-mod builds using Ford Racing's 5.0L engine controls pack. Part No: M-6017-504V.

Fits 2015 Mustang GT
  • 5.0L (302 cubic inches)
  • 11.0:1 compression ratio (nominal)
  • Mahle® Hard Anodized forged pistons with Grafal® low friction coating
  • Manley® H-beam connecting rods with ARP® 2000 bolts
  • BOSS 302 connecting rod bearings
  • Forged steel crankshaft
  • Uses production 2015 Mustang GT aluminum block
  • Large rear sump oil pan with 8 quart capacity features optimized oil drainback and windage tray to control oil and improve high-rpm performance
  • Tuned composite Mustang GT intake manifold with production drive by wire 80 mm throttle body variable runner control
  • Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction.
  • Boss 302 Valve Springs, M-6513-M50BR
  • Mustang GT production camshafts
  • Intake: 13mm lift 260 degrees duration
  • Exhaust: 13mm lift 263 degrees duration
  • Ford Racing engine cover kit M-9680-M50A
  • Includes manual transmission engine injector harness
  • Front cover is modified for Ford Racing Supercharger Kits
  • For applications not using a Ford Racing Supercharger Kit, stock timing cover must be installed.
  • Includes colder heat range zero (0) spark plugs, M-12405-M50
  • Includes Ford Racing oil filter, part no: M-6731-FL820
  • Includes billet steel gerotor oil pump M-6600-50CJ
  • Vehicle harness and PCM not included. Use Ford Racing wiring, PCM and installation kit M-6017-504V designed for street rod/project car installation.
  • Does not include alternator, for alternator kit see M-8600-M50BALT
  • Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
  • Does not include exhaust manifolds

WARRANTY AVAILABILITY

WARNING:
This part has been designed and is intended for off-highway application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations relating to emission requirements and motor vehicle safety standards.

*Not all Ford Performance Parts may be installed on vehicles that are driven on public roads. Please see individual part descriptions for application limitations.

Click here for more emissions compliance information.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

ford
Shelby GT500
ford > Engine
Shelby GT500 > Engine
Engines