Home > 2005-14 Road Race >


Alternative Views:

Our Price: $513.97

Availability: Usually Ships in 24 Hours
Product Code: WR-PCVCANKIT

Description Technical Specs


**WATSON RACING EXCLUSIVE** Watson Racing/Peterson Catch Can. Venting is from the cap itself.
2 Port -10 MALE AN FITTINGS. All lines and fittings are provided, and better yet- the rubber line is now produced UN-CUT and without the unnecessary sheathing. This gives you the flexibility to mount the Peterson Can in any location as well as flexibility in the vehicle you choose to use this on: 2005 all the way through S550 Mustang, for road racing OR drag racing! Standard equipment on Ford factory built drag and road race cars. This item is NOT intended for daily street use where fumes may be drawn in through the cowl area. See our 3 port WR-PCVCANKITSEALED unit for alternate venting away from the cowl.

The Mustang engine bay is already very cramped- but relocating the heavy battery to the trunk (as most racers do) frees up the perfect location for Watson’s Breather Can. Check out Watson Racing’s 100-percent bolt-in battery relocation kit


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 9 Write a review »

  2 of 2 people found the following review helpful:
5 of 5 Watson Racing Catch Can kit June 29, 2017
Reviewer: Alex Coronado from West Covina, CA United States  
Opening this kit you'll see there is quite a bunch of pieces. You might just think it's a box of junk. Wow would the average person be so wrong. This kit Is seriously a no brainer, doesn't come with instructions. But hey, you're a car guy and obviously you have to know what you're doing if you purchased this kit vs another cheap generic unit. Install was an absolute breeze. Litterally took me 25-30 minutes. Most of the time was spent double checking my drill points. Other then that, cut the hose to length of your desire, plumb the hardware, plug in the connections and you're good to go. The 1 negative I could say and it really doesn't bother me. Is the vacuum fittings on the cold air and manifold ports don't come with any clamps. Does it bother me ? Not really honestly, my engine isn't boosted so I don't have to worry about this being blown off. For someone who is make sure you purchase little 1 inch clamps. As far as that though this kit is seriously awesome! Thanks Watson Racing!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Great buy, love it! May 25, 2017
Reviewer: Anonymous Person  
Only way to absolutely make sure there is no oil residue making it into the intake. Currently running on my 2014 mustang gt with a vmp tvs

Was this review helpful to you?

  0 of 0 people found the following review helpful:
4 of 5 Read if you want to use on a 3V February 27, 2017
Reviewer: Joseph Torian from Fayetteville, NC United States  
Great product. My only complaint is that I installed mine in a 3V and had to improvise a little. The passenger valve cover connector doesn't connect to the 90* elbows provided because the 3v has smaller 3/8" fittings on the passenger valve cover. The stock connector can be used by cutting one out and  attaching it to 3/8" hose and a 3/8" to 5/8" adapter. Unfortunately I didn't know all this before hand and threw away my stock hose years ago and was just running breathers.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Catch Can/Breather April 14, 2016
Reviewer: Jeff Wahl from Brunswick, OH United States  
Helped out in keeping the intake from getting oiled down when you participate in any tack day event. I mounted it to a different location for my use.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Perfect install April 14, 2016
Reviewer: Jose Garcia from Orlando, FL United States  
This thing is a piece of art. Shipping was fast and I always like doing business with WR.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

2005-14 Road Race
2005-14 Drag Race
2015-2019 Mustang S550
Watson Racing