Home > 1965-78 Mustang >

SMALL BLOCK V-8 HYDRAULIC ROLLER TAPPET CAMSHAFTS (M-6250-F303) 1985+

SMALL BLOCK V-8 HYDRAULIC ROLLER TAPPET CAMSHAFTS
 
Our Price: $422.38


Availability: Usually Ships 24 to 48 Business Hours
Product Code: WR-6250-F303
Qty:

Description Technical Specs
 
The F303 cam works well in supercharged applications. This cam is also used in Ford Racing's 347SR Blue Oval circle track engines. This cam provides a noticeable power improvement and maintains great drive-ability.
Works well with a manual or automatic transmission. Works well with carburetors or mass air fuel injection.

Fits 1985 and later 302 roller cam blocks
Will also fit 1963 - 1984 non-roller cam 289-302 blocks when used with hydraulic roller lifters M-6500-T58
Will also fit 1994 -1997 351W blocks with factory roller cam
Will also fit 1969 - 1993 non-roller cam 351W blocks when used with hydraulic roller lifters M-6500-T58
Requires upgraded valve springs. For stock cylinder head applications use M-6513-A50 valve springs installed at 1.820-inch. For aftermarket cylinder heads M-6513-BH recommended.
Valve spring requirements: 120 lbs valve seat pressure minimum 295 lbs open.
On EFI engines, performance camshafts work only with mass air induction systems. Will not work with Explorer EEC-V EFI or speed density EFI systems.
Also fits 1994-97 351W with factory roller cam when used with mass air EFI.
Stock 5.0L HO cam advertised specs are 266-degree/266-degree duration, 0.444-inch/0.444-inch lift.<
Higher stall torque converter required for automatic transmission

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

1965-78 Mustang
1979-93 Mustang
1979-93 Mustang > Engine
ford > Engine
Ford Racing Parts
ford


ALUMINUM AND URETHANE SPECIAL EDITION MUSTANG PEDAL COVER (M-2301-A) 1994-2004 $27.51
CONTROL PACK - 2011-2014 COYOTE 5.0L 4V MANUAL TRANS WITH SPEED DIAL $2,401.40
ROAD RACE MUSTANG LOWER CONTROL ARM BUSHINGS FR500C (M-5638-A) 2005-2014 $82.74
3V MODULAR ROCKER ARM AND LASH ADJUSTER KIT (M-6529-3V) 2005-2010 $493.76
T-5 REBUILD KIT (M-700-A) $682.10
CRANK PULLEY SPACER (M-8510-C351) $62.37
302/351 CRANKSHAFT DAMPER SB 0 BALANCE (M-6316-D302) 1994-2001 $410.60
ENGINE OIL DIPSTICK/TUBE (M-6750-C303) $37.83
CYLINDER HEAD GASKET (M-6051-B341) $103.40